CBHD3

Input Voltage: Universal Input

  • Advanced technology
  • Input voltage: universal
  • On-board or stand-alone use

Komplet modeloversigt

SKU Ampere Voltage IP-rating Input Voltage
SKU Ampere Voltage IP-rating Input Voltage
CBHD3 12-15 15A 12V IP30 Universal Input
CBHD3 12-20 20A 12V IP30 Universal Input
CBHD3 12-25 25A 12V IP30 Universal Input
CBHD3 24-15 15A 24V IP30 Universal Input
CBHD3 24-20 20A 24V IP30 Universal Input
CBHD3 24-25 25A 24V IP30 Universal Input

Dataark

CBHD3 Specifications (EN)

Tekniske Features

  • High frequency system with advanced technology.
  • Universal Input 85Vac÷264Vac, 50Hz÷60Hz.
  • Charging process fully controlled by microprocessor.
  • Efficiency > 90%.
  • Possibility to change the charging curve by means of dipswitches, choosing from resident curves for lead-acid, Gel and AGM batteries. Any other curve available on request for all type of batteries (Li-Ion and Li-Po included).
  • Possibility to change the battery voltage and the charging current by means of dipswitches.
  • Charging process starting in the “soft start” mode and automatic reset upon connection of a new battery.
  • Led signals of possible anomalies.
  • Output ripple at maximum load lower than 100mV.
  • Compensation of the voltage drop on the connecting cables to the battery.
  • Charge cycle begins with batteries as low as 2V.
  • Protection against polarity inversions, short circuits, over-voltages or anomalies.
  • Thermal protection against overheating.
  • Equipped with NC (normally closed) relay for safety interlock connections (available only for on-board installation).
  • Operating temperature: -10°C to +45°C (14°F to 113°F).
  • Maximum relative humidity: 90%.
  • International Protection Rating IP30 with forced ventilation.
  • Self-extinguishing case made of UL94-V0 ABS with double insulation.
  • Remote 3-LED (red,yellow and green) of recharge/charge (optional) with
    • 3-LED board (code: SKLED)
    • 3-LED 18mm diameter round remote indicator (code: LBF318EZ)
    • 3-LED 22x30mm squared remote indicator (code: LBF3QEZ)
  • Integrated battery discharge indicator with lockout relay for 80% with:
    • 3-LED board (code: SKLED)
    • 3-LED 18mm diameter round remote indicator (code: LBF318EZ)
    • 3-LED 22x30mm squared remote indicator (code: LBF3QEZ)
    • (optional: please add the suffix LBF to the model of the charger).
  • (Optional) The information relevant to the last 32 charging cycles (the duration of the charging cycle, the Ah's delivered by the battery, the voltage at the end of the charge and the possible error messages) can be downloaded in an excel file through a cable and a specific software available as an optional (code: SPEDATACABLEHD).
  • Customizable according to customer needs.