CBHF2

Input Voltage: Country specific

  • Customizable
  • Efficiency > 90%
  • Possibility to change the charging curve by means of dipswitches

Komplet modeloversigt

SKU Ampere Voltage IP-rating Input Voltage
SKU Ampere Voltage IP-rating Input Voltage
CBHF2 12-15 15A 12V IP30 Country specific
CBHF2 12-20 20A 12V IP30 Country specific
CBHF2 12-25 25A 12V IP30 Country specific
CBHF2 12-30 30A 12V IP30 Country specific
CBHF2 24-15 15A 24V IP30 Country specific
CBHF2 24-20 20A 24V IP30 Country specific
CBHF2 24-25 25A 24V IP30 Country specific
CBHF2 24-30 30A 24V IP30 Country specific
CBHF2 36-15 15A 36V IP30 Country specific
CBHF2 36-20 20A 36V IP30 Country specific
CBHF2 36-25 25A 36V IP30 Country specific
CBHF2 48-15 15A 48V IP30 Country specific
CBHF2 48-20 20A 48V IP30 Country specific

Dataark

CBHF2 Specifications (EN)

Tekniske Features

  • High frequency system with advanced technology.
  • Charging process fully controlled by microprocessor.
  • Efficiency > 90%.
  • Insensitive charge parameters related to input line voltage variations
  • Visualization on a lit display of the charging current, of the battery voltage, of the charging time, of the charge supplied in Ah and of the energy absorbed in KWh.
  • Possibility to change the charging curve by means of dipswitches, choosing from 16 standard pre-programmed curves for lead-acid, Gel and AGM batteries. Any other curve available on request for all type of batteries (Li-Ion and Li-Po included).
  • dV/dt adaptive charging profile available under request for Wet lead-acid traction batteries.
  • Possibility to change the battery voltage and the charging current by means of dipswitches.
  • Charging process starting in the "soft start" mode and automatic reset upon connection of a new battery.
  • Alphanumeric signals of possible anomalies.
  • Output ripple at maximum load lower than 100
  • Compensation of the voltage drop on the connecting cables to the battery.
  • Charge cycle begins with batteries as tow as 2V.
  • Protection against polarity inversions, short circuits, over-voltages or anomalies.
  • Thermal protection against overheat
  • Equipped with NC (normally closed) relay for safety interlock connections (available only for on-board installation).
  • Operating temperature: -10°C + +45°C (14°F + 113°F).
  • Maximum relative humidity: 90%.
  • International Protection Rating IP30 with forced ventilation.
  • Self-extinguishing case made of UL94-VO ABS.
  • Remote 3-LED (red, yellow and green) of recharge (optional) with
    • 3-LED board (code: SKLED)
    • 3-LED 18mm diameter round remote indicator (code: LBF318EZ)
    • 3-LED 22x30mm squared remote indicator (code: LBF30EZ)
  • Available under request the information relevant to the last 30 charging cycles (the duration of the charging cycle, the Ah's delivered by the battery, the voltage at the end of the charge and the possible error messages) can be downloaded in an excel file through a cable (code: SPEDATACABLEHF) and a specific software available.