GREEN 4

Input Voltage: 230 Vac

  • New vertical case for better ventilation and cooling
  • Customizable in terms of: battery type, charging voltage, charging current, charging curves
  • Suitable for all types of batteries: AGM, GEL, Lithium, Tubular…
  • Possibility to download the information of the last 300 charging cycles via USB port (HF View software)

Komplet modeloversigt

SKU Ampere Voltage IP-rating Input Voltage
SKU Ampere Voltage IP-rating Input Voltage
GREEN4 24-80 80A 24V IP32 230 Vac
GREEN4 24-90 90A 24V IP32 230 Vac
GREEN4 24-100 100A 24V IP32 230 Vac
GREEN4 24-120 120A 24V IP32 230 Vac
GREEN4 36-50 50A 36V IP32 230 Vac
GREEN4 36-60 60A 36V IP32 230 Vac
GREEN4 36-70 70A 36V IP32 230 Vac
GREEN4 36-80 80A 36V IP32 230 Vac
GREEN4 36-90 90A 36V IP32 230 Vac
GREEN4 48-50 50A 48V IP32 230 Vac
GREEN4 48-60 60A 48V IP32 230 Vac
GREEN4 48-75 75A 48V IP32 230 Vac
GREEN4 72-30 30A 72V IP32 230 Vac
GREEN4 72-40 40A 72V IP32 230 Vac
GREEN4 72-50 50A 72V IP32 230 Vac
GREEN4 80-30 30A 80V IP32 230 Vac
GREEN4 80-40 40A 80V IP32 230 Vac

Dataark

GREEN 4 Specifications (EN)

Tekniske Features

  • New design for better thermal performance.
  • High- frequency switching technology.
  • Active PFC
  • Very low output ripple
  • High efficiency over 89%
  • Suitable both for acid-lead, sealed and gel traction batteries.
  • Microprocessor controlled charge process.
  • Standard charging curves: IUIa, IUUo, IUIU, Iua, Iuo, other special charging curves are customizable.
  • Possibility to change any parameter or the whole charging curve
  • Simultaneous visualization, on a graphic display, of the following data:
    • Charging current
    • Battery voltage
    • Amper-hours absorbed by the battery
    • Time of the charge cycle
    • Charging profile
  • Display visualization in alphanumeric form of potential error messages
  • Compensation of the voltage drop on the connection cables at the battery.
  • Charge process starting in the “soft start” modality and automatic reset in case of a new battery insertion.
  • Charge process starts also with 2V batteries.
  • Output protection against short-circuit.
  • Protection against polarity inversion.
  • Programmable via USB port or via display.
  • Possibility to download the information of the last 300 cycles via USB port.
  • Front host USB port to load/modify configurations through USB stick in one click.