HF1-IP

Input Voltage: Universal Input

  • Environmentally protected IP55
  • Sealed
  • Input voltage: universal

Complete Models Overview

SKU Ampere Voltage IP-rating Input Voltage
SKU Ampere Voltage IP-rating Input Voltage
HF1-IP 12-10 10A 12V IP55 Universal Input
HF1-IP 24-10 10A 24V IP55 Universal Input
HF1-IP 12-13 13A 12V IP55 Universal Input
HF1-IP 24-13 13A 24V IP55 Universal Input

Specification Sheets

HF1-IP Specifications (EN)

Technical Features

  • High frequency system with advanced technology.
  • Universal Input 85Vac7264Vac, 50Hz760Hz.
  • Active PFC.
  • Efficiency > 90%.
  • Environmentally protected IP55.
  • Integrated battery discharge indicator (battery fuel gauge) with lockout relay for 80% discharged batteries (option available only for on-board installation: please add the suffix LBF to the model of the charger).
  • Remote 3-LED (red, yellow and green) of charge/discharge (battery fuel gauge)/error status indicator (optional) with
    • 3-LED board (code: CBNLED)
    • 3-LED compact board (code: SKLED)
    • 3-LED 18mm diameter round remote indicator (code: LBF318EZ)
    • 3-LED 22x30mm squared remote indicator (code: LBF3QEZ)
  • Remote 10 segments LED Bar Graph display of charge/discharge (battery fuel gauge)/error status indicator optional with
    • SenDec special version of battery fuel gauge exclusively developed with S.P.E. and compatible only with S.P.E. battery chargers (code: SDxxVBDILBF where xx is the battery voltage)
  • Charging parameters are insensitive to the AC input line voltage variations.
  • Charging process fully controlled by microprocessor.
  • Resident charging curves for Lead-acid (Wet), AGM and Gel batteries selectable by changing the internal dipswitch configuration. All other charging curves available on request for all type of batteries (Li-Ion and Li-Po included).
  • Protection against polarity inversions, short circuits, over-voltages or anomalies.
  • Output ripple at maximum charge lower than 100mV.
  • Compensation of the voltage drop on the connecting cables to the battery.
  • Charge cycle begins with batteries as low as 2V.
  • Thermal protection against overheating.
  • Equipped with NC (normally closed) relay for safety interlock connections (available only for on-board installation).
  • Operating temperature: 0°C to 40°C
  • Maximum relative humidity: 90%.
  • Available under request the information relevant to the last 32 charging cycles (the duration of the charging cycle, the Ah1s delivered by the battery, the voltage at the end of the charge and the possible error messages) can be downloaded in an excel file through a cable (code: SPEDATACABLEHD) and a specific software available .